New Angie BM27
15400.00
AED
Professional stationary laser manufactured by Newangie, specialized for permanent tattoo removal, permanent makeup removal and skin pigmentation correction. The device with three wavelengths (532 nm, 1064 nm, 1320 nm) provides safe and effective removal of pigments of all colors on all skin types. BM27 stands out with significantly higher pulse energy (up to 400 mJ for the dual rod) compared to competitors (typically 150-300 mJ), as well as the use of premium components: YAG powder rods, Dazhi 300W power supply and high-frequency capacitors. Q-Switch (Quality Switching) is a laser modulation technology that concentrates all laser energy into very short, high-intensity pulses.
APPLICATION AREA
Tattoo removal:
- Black and blue tattoos (1064 nm) - 3-8 sessions
- Red and orange tattoos (532 nm) - 2-6 sessions
- Multi-colored tattoos - combined use of 532 nm + 1064 nm
- Green pigments (1064 nm) - 4-8 sessions
- Professional high-density tattoos - require 5-8 sessions with dual rod (400 mJ)
Treatment efficiency at 1064 nm shows significant pigment reduction even at low fluence (2 J/cm²) with large spot size (4-6.8 mm) and interval between procedures of 2+ months.
Permanent makeup removal:
- Eyebrow permanent makeup (530 nm for warm brown shades, 1064 nm for cool gray)
- Eyelid permanent makeup (532 nm for black/brown)
- Lip permanent makeup (532 nm for red shades, 1064 nm for brown shades)
Pigmentation correction:
- Freckle removal (1064 nm, 532 nm)
- Age spot (lentigo) removal (1064 nm, 532 nm depending on spot color)
- Mole removal (1064 nm, 532 nm)
- Eyebrow removal (correction and complete removal) (1064 nm)
Skin rejuvenation:
- Carbon peeling (1320 nm + carbon gel) for deep cleansing, rejuvenation, improvement of skin texture
- Removal of vascular lesions (hemangiomas, telangiectasias) (1064 nm)
Procedure protocol:
- Assessment of patient's skin type (Fitzpatrick scale I-VI)
- Determination of tattoo or permanent makeup color and depth
- Exclusion of contraindications
- Application of local anesthesia (lidocaine cream) 15-30 minutes before the procedure
- Application of conductive gel to the treatment area
- Eye protection (eye mask for patient and safety goggles for operator)
- Procedure performance:
- Selection of wavelength (532 nm, 1064 nm or 1320 nm) depending on pigment color
- Setting parameters: energy (fluence) 50-1000 mJ/cm² depending on pigment type / frequency 1-10 Hz / spot size (usually 6 mm)
- Test shot on a hidden skin area
- Treatment of the area with slight pulse overlap
- Observation of characteristic "pop" sound (sign of photoacoustic effect)
- Visual skin whitening (Tyndall effect) indicates successful pigment fragmentation
- Post-procedure care:
- Application of antibacterial cream and occlusive dressing (24-48 hours)
- Avoid water for 24 hours
- Use SPF 50+ for 2-4 weeks
- Avoid hot baths, saunas, swimming pools for one week
- Possible crusting that falls off within 7-14 days
- Interval between procedures: 4-8 weeks
Specifications:
- Laser medium: Neodymium-doped YAG (Yttrium Aluminum Garnet) crystal rod
- Wavelengths: 532 nm (green, frequency doubled by KTP crystal), 1064 nm (infrared), 1320 nm (infrared)
- Power configurations: 500 W (machine) / 350 W (power supply)
- Single pulse energy: 180 mJ (powder rod, one lamp) or 400 mJ (powder + yellow rod, φ5+φ6)
- Energy density (fluence): 50-1000 mJ/cm²
- Energy range by wavelength: 532 nm: 50-500 J/cm², 1064 nm: 100-1000 J/cm², 1320 nm: 100-1000 J/cm²
- Spot size: 6 mm (standard), additionally 2-5 mm
- Repetition rate: 1-10 Hz
- Q-switch pulse width: 8 ns (single rod) or 12 ns (dual rod)
- Power supply: Dazhi 300W (premium class) – ensures stable and predictable output energy
- Capacitor: 100 µF (single rod) or 2×100 µF (dual rod, total 200 µF)
- Cooling system: Combined water + air system
- Parameter control: Energy, frequency adjustment, wavelength selection directly from the screen
- Emergency stop: Red emergency shutdown button on the housing
- Foot switch: For controlling laser shot during the procedure
- Input voltage: 220V±10% 50/60 Hz
This laser is a reliable, high‑energy solution for clinics focused on professional tattoo and pigmentation treatments with proven safety and efficacy.
APPLICATION AREA
Tattoo removal:
- Black and blue tattoos (1064 nm) - 3-8 sessions
- Red and orange tattoos (532 nm) - 2-6 sessions
- Multi-colored tattoos - combined use of 532 nm + 1064 nm
- Green pigments (1064 nm) - 4-8 sessions
- Professional high-density tattoos - require 5-8 sessions with dual rod (400 mJ)
Treatment efficiency at 1064 nm shows significant pigment reduction even at low fluence (2 J/cm²) with large spot size (4-6.8 mm) and interval between procedures of 2+ months.
Permanent makeup removal:
- Eyebrow permanent makeup (530 nm for warm brown shades, 1064 nm for cool gray)
- Eyelid permanent makeup (532 nm for black/brown)
- Lip permanent makeup (532 nm for red shades, 1064 nm for brown shades)
Pigmentation correction:
- Freckle removal (1064 nm, 532 nm)
- Age spot (lentigo) removal (1064 nm, 532 nm depending on spot color)
- Mole removal (1064 nm, 532 nm)
- Eyebrow removal (correction and complete removal) (1064 nm)
Skin rejuvenation:
- Carbon peeling (1320 nm + carbon gel) for deep cleansing, rejuvenation, improvement of skin texture
- Removal of vascular lesions (hemangiomas, telangiectasias) (1064 nm)
Procedure protocol:
- Assessment of patient's skin type (Fitzpatrick scale I-VI)
- Determination of tattoo or permanent makeup color and depth
- Exclusion of contraindications
- Application of local anesthesia (lidocaine cream) 15-30 minutes before the procedure
- Application of conductive gel to the treatment area
- Eye protection (eye mask for patient and safety goggles for operator)
- Procedure performance:
- Selection of wavelength (532 nm, 1064 nm or 1320 nm) depending on pigment color
- Setting parameters: energy (fluence) 50-1000 mJ/cm² depending on pigment type / frequency 1-10 Hz / spot size (usually 6 mm)
- Test shot on a hidden skin area
- Treatment of the area with slight pulse overlap
- Observation of characteristic "pop" sound (sign of photoacoustic effect)
- Visual skin whitening (Tyndall effect) indicates successful pigment fragmentation
- Post-procedure care:
- Application of antibacterial cream and occlusive dressing (24-48 hours)
- Avoid water for 24 hours
- Use SPF 50+ for 2-4 weeks
- Avoid hot baths, saunas, swimming pools for one week
- Possible crusting that falls off within 7-14 days
- Interval between procedures: 4-8 weeks
Specifications:
- Laser medium: Neodymium-doped YAG (Yttrium Aluminum Garnet) crystal rod
- Wavelengths: 532 nm (green, frequency doubled by KTP crystal), 1064 nm (infrared), 1320 nm (infrared)
- Power configurations: 500 W (machine) / 350 W (power supply)
- Single pulse energy: 180 mJ (powder rod, one lamp) or 400 mJ (powder + yellow rod, φ5+φ6)
- Energy density (fluence): 50-1000 mJ/cm²
- Energy range by wavelength: 532 nm: 50-500 J/cm², 1064 nm: 100-1000 J/cm², 1320 nm: 100-1000 J/cm²
- Spot size: 6 mm (standard), additionally 2-5 mm
- Repetition rate: 1-10 Hz
- Q-switch pulse width: 8 ns (single rod) or 12 ns (dual rod)
- Power supply: Dazhi 300W (premium class) – ensures stable and predictable output energy
- Capacitor: 100 µF (single rod) or 2×100 µF (dual rod, total 200 µF)
- Cooling system: Combined water + air system
- Parameter control: Energy, frequency adjustment, wavelength selection directly from the screen
- Emergency stop: Red emergency shutdown button on the housing
- Foot switch: For controlling laser shot during the procedure
- Input voltage: 220V±10% 50/60 Hz
This laser is a reliable, high‑energy solution for clinics focused on professional tattoo and pigmentation treatments with proven safety and efficacy.
KEY BENEFITS
Free training
Official warranty
Free shipping
English language menu
Certificates of conformity
Full documentation package
Frequently Asked Questions
Yes! COSMO TECH offers free shipping to all seven emirates of the UAE (Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain) as well as to all GCC countries - Saudi Arabia, Qatar, Kuwait, Bahrain, and Oman. Delivery typically takes 3-7 business days depending on the location. Customs clearance documentation is included in our service.
We provide clients with a full package of legal documents required for equipment registration with UAE health authorities, including the sales contract, certificate of conformity, EAC certificate, declaration of conformity (EAC), test certificate, and acceptance certificate. Our team can also advise you on the registration process with the Ministry of Health & Prevention (MOHAP), Dubai Health Authority (DHA), or Abu Dhabi Department of Health (DOH).
Absolutely! Every COSMO TECH customer receives free online training tailored to the specific device you purchased. Our training is conducted by certified specialists with years of practical experience in aesthetic medicine. If you need hands-on practice, we also offer paid offline training at our training centers or directly at your salon. Upon completion, you receive a personalized certificate confirming your qualification to operate the equipment.
Yes, we do. COSMO TECH provides interest-free installment plans for our clients in the UAE and Gulf region. The specific terms depend on the order value and your business status. We understand that investing in professional equipment requires budget planning, so our team will work with you to find a payment solution that fits your needs. Contact our sales department for a customized offer.
All COSMO TECH equipment comes with an official 24-month warranty. If a technical issue arises, our certified technicians and partners in the UAE can respond quickly. In case of malfunction, the repair is carried out at our authorized service center or by our on-site technicians. The warranty covers manufacturing defects; it does not cover mechanical damage or unauthorized repairs.
Currently, COSMO TECH operates primarily through our online platform and official website cosmo-tech, with dedicated account managers for the Gulf region. While we do not yet have a physical showroom in Dubai, we offer detailed video demonstrations, remote consultations, and can connect you with existing clients in the UAE for a live demonstration upon request. We also provide a full documentation package and certificates so you can verify compliance with local regulations.
Yes, most of our devices come with a menu in English as standard, with another laguages also available. For selected models, we can provide an Arabic interface or help you adapt the menu for your local staff. Our team also provides instructions and guidance in English, so you can be confident that your technicians will operate the equipment correctly regardless of their native language.
If the product has not yet been transferred to you, you may cancel your order. After receiving the equipment, you have 7 days to inspect it - provided the device has not been used, the seals and labels are intact, and the original packaging and documents are preserved. If a manufacturing defect is identified within 14 days of purchase, we will arrange an exchange or full refund. Consumables and custom-configured devices may not be eligible for return. We ship orders across the GCC free of charge, and return shipping costs are handled according to the specific case.
Company reviews
Contact & Support
We’re with you at every step, helping you choose the right equipment for your tasks.
Working hours: Daily, 9:00 AM to 8:00 PM
tel:+971547678060
🚩 DUBAI / UAE
By submitting this form, you confirm that you have read and agree to our Privacy Policy and hereby give your consent to the processing of your personal data.
Contact & Support
We’re with you at every step, helping you choose the right equipment for your tasks.
Working hours: Daily, 9:00 AM to 8:00 PM
🚩 DUBAI / UAE
By submitting this form, you confirm that you have read and agree to our Privacy Policy and hereby give your consent to the processing of your personal data.
Manage cookies
Cookie Settings
Cookies necessary for the correct operation of the site are always enabled.
Other cookies are configurable.
Other cookies are configurable.
Our managers will contact you within 15 minutes and provide a consultation on all questions.
By submitting this form, you confirm that you have read and agree to our Privacy Policy and hereby give your consent to the processing of your personal data.