Thulium laser New Angie THULIUM LASER 1927 NM
91750.00
AED
Professional fractional non-ablative laser manufactured by Newangie, specialized for skin lightening, pigmentation treatment and rejuvenation with minimal downtime. The Thulium laser 1927 nm stands out with its unique wavelength, which occupies an intermediate position between the non-ablative Er:Glass 1550 nm and the ablative CO₂ 10600 nm, providing sub-ablative action – the ideal balance between efficacy and safety. The device is equipped with 30 W power, a wide energy range (1-300 mJ), flexible scanning parameters (shapes, patterns, density) and fast treatment time (full face in 6-8 minutes).
The 1927 nm wavelength has a high water absorption coefficient (5-7 times higher than 1550 nm), allowing precise targeting of the epidermis and upper dermis, making it particularly effective for treating hyperpigmentation with minimal risk of post-inflammatory hyperpigmentation (PIH).
OPERATING PRINCIPLE OF THE 1927 NM THULIUM LASER
Fractional energy delivery. Unlike traditional lasers that treat the entire skin surface continuously, the thulium laser uses fractional mode – creating thousands of microscopic zones of thermal damage (Microthermal Treatment Zones, MTZ) surrounded by healthy tissue.
What are MTZ (Microthermal Zones)?
- Diameter of each zone: 50-100 microns
- Penetration depth: 50-200 microns (depending on energy)
- Coverage density: 15-70% of skin area per pass
- Number of zones: thousands of micro-zones per procedure
High water absorption – targeted action on the epidermis. The 1927 nm wavelength has a 5-7 times higher water absorption coefficient than 1550 nm, and significantly higher than CO₂ 10600 nm. This means that laser energy is quickly absorbed by water in the epidermis, without penetrating too deep into the dermis.
Chromophores (target structures) for 1927 nm:
- Water (H₂O) – main chromophore, high absorption
- Melanin – secondary chromophore, moderate absorption
- Haemoglobin – tertiary chromophore, low absorption
Controlled thermal effect (sub-ablation). The absorbed light energy is instantly converted into heat, creating controlled thermal damage:
Temperature in MTZ:
- Centre of zone: 60-100°C (tissue coagulation)
- Periphery of zone: 40-50°C (stimulation without damage)
- Surrounding tissue: normal temperature
Sub-ablative effect:
- At low energy (10-20 mJ): Non-ablative, creates coagulation only in the epidermis without breaking the surface.
- At medium energy (20-40 mJ): Sub-ablative, creates micropores on the skin surface and coagulation into the upper dermis.
- At high energy (>40 mJ): Near-ablative, creates microchannels through the epidermis into the dermis.
Melanin Shuttling mechanism. The 1927 nm thulium laser creates a unique effect called melanin shuttling – transporting melanin from deep skin layers to the surface for removal.
How it works:
- Laser energy creates microchannels (MTZ) through the epidermis
- Thermal effect destroys melanocytes and fragments melanin
- Melanin fragments are pushed to the surface through the microchannels
- Within 3-7 days, melanin exfoliates together with dead skin cells
- New skin growing from healthy areas has a lighter and more even tone
Stimulation of collagen production and neocollagenesis. Thermal damage activates the wound healing response, which triggers the production of new collagen and elastin:
Recovery phases:
- 0-24 hours: Inflammation and macrophage activation
- 1-7 days: Re-epithelialization (epidermal restoration)
- 7-30 days: Active collagen production by fibroblasts
- 1-3 months: Collagen remodelling and final result
Result:
- Pore reduction: collagen fibres tighten enlarged pores
- Wrinkle reduction: new collagen fills fine wrinkles
- Skin tightening: contraction of old collagen and formation of new gives a mild lifting effect
Creation of micropores for active substance delivery. A unique feature of the 1927 nm thulium laser is the creation of micropores on the skin surface that act as channels for delivering active substances into deep skin layers.
Drug Delivery Enhancement mechanism:
- The laser creates temporary micropores 50-200 microns deep
- Micropores remain open for 2-24 hours after the procedure
- Active substances (serums, growth factors, tranexamic acid) penetrate deeply through the micropores
- Delivery efficiency increases 100-1000 times
TECHNICAL SPECIFICATIONS
- Wavelength: 1927 nm
- Laser source: Thulium Fiber Crystal (Tm:fiber)
- Laser power: 30 W
- Energy per MTZ: 1-300 mJ (adjustable)
- Pulse duration: 0.1-10 ms (adjustable)
- Tip size: 30 mm
- Scanning size (graphic): 1×1 mm – 20×20 mm (adjustable)
- Scanning shape: Square, Triangle, Circle, Hexagon
- Scanning mode: Sequential, Central or Random
- Spot spacing: 0.1-2 mm (adjustable)
- Coverage density: 15-70% per pass
- Fractional mode: adjustable parameters (energy, pulse duration, pattern, tip type), multidimensional action on superficial and deep layers simultaneously: pigmentation, pores, wrinkles, scars
- Sliding mode: lower energy with higher repetition rate, uniform energy distribution, safe action: rejuvenation, photoaging
- Pulse mode: individual pulses with controlled duration: spot treatment
- Super pulse mode: high peak power with short pulses: deep scars, thick skin
- Cooling system: Air cooling
- Display: Touch screen with intuitive interface
- Input voltage: AC 220V 50/60 Hz (or 110V)
APPLICATION AREA
Melasma:
- Efficiency: 29-36% improvement in MASI (Melasma Area and Severity Index) after 3 procedures
- Mechanism: Melanin shuttling – transport of melanin to the surface and exfoliation
- Protocol: 3-6 procedures every 2-6 weeks + topical hydroquinone 4% after each procedure
- Advantage: Minimal risk of relapse and PIH compared to CO₂ laser
Post-inflammatory hyperpigmentation (PIH):
- Efficiency: Excellent results in 75% of patients after 1-4 procedures
- Special feature: Safe for dark skin (Fitzpatrick IV-VI)
- Protocol: Low energy (20 mJ), low density (30% coverage), 4 passes
Solar lentigo and freckles:
- Efficiency: Very high (>75% lightening after 2-3 procedures)
- Mechanism: Selective destruction of melanin in the epidermis
- Result: Visible lightening within 3-7 days after the procedure
Photoaging and overall skin lightening:
- Efficiency: High, luminosity enhancement
- Mechanism: Removal of photodamaged epidermis and stimulation of renewal
- Result: Brighter, lighter and more even skin
Fine wrinkles and texture:
- Efficiency: High for fine wrinkles, moderate for deep wrinkles
- Mechanism: Neocollagenesis and dermal remodelling
- Protocol: 3-5 procedures every 4-6 weeks
Enlarged pores:
- Efficiency: High, noticeable reduction in pore size
- Mechanism: Collagen contraction around pores + neocollagenesis
- Result: Visible improvement after the first procedure
Elasticity and tone improvement:
- Efficiency: Moderate to high, refreshed appearance
- Mechanism: Stimulation of collagen and elastin production
Acne scars (atrophic):
- Efficiency: 35-36% improvement in GBS (Global Acne Scarring) after 3 procedures
- Comparison: Similar efficacy to ablative Er:YAG 2940 nm but with shorter downtime
- Protocol: 3-5 procedures every 4-6 weeks, medium-high energy (30-50 mJ)
Post‑surgical scars:
- Efficiency: Moderate, better for fresh scars (<1 year)
- Mechanism: Micro‑peeling and collagen remodelling
Hair growth stimulation:
- Efficiency: Moderate, ancillary role
- Mechanism: Direct thermal stimulation + creation of microchannels for delivery of growth factors
- Protocol: 4-6 procedures + topical growth factors
Drug Delivery Enhancement:
- Application: Enhancing penetration of topical agents (serums, growth factors, tranexamic acid)
- Efficiency: 100-1000 times increase in penetration
Procedure protocol
- Skin type assessment: Determine Fitzpatrick type (I-VI)
- Skin preparation: cleanse of cosmetics and impurities, apply topical anaesthetic (optional, not mandatory)
- Parameter adjustment: for pigmentation: 20-30 mJ, 30-50% coverage, 4-6 passes; for rejuvenation: 15-25 mJ, 15-30% coverage, 6-8 passes; for scars: 30-50 mJ, 40-60% coverage, 4-6 passes
- Select scanning shape: Square for large areas, Circle for face
- Select mode: Sequential for uniform coverage, Random to minimise heat accumulation
- Procedure performance:
- Test pulse: apply to a small area to assess reaction
- Area treatment: even scanning with adjusted parameters
- Multiple passes: 4-8 passes depending on goal (each pass increases coverage density)
- Procedure time: full face in 6-8 minutes
- Immediate effect: mild redness and swelling (resolve within 2-24 hours)
- Post‑procedure care:
- 0-2 hours after: mild redness (like after sun exposure), makeup allowed
- 2-24 hours: redness decreases, mild peeling may appear
- 3-7 days: micro‑crusts (MEST – Microscopic Epidermal Necrotic Debris) exfoliate, skin becomes lighter
- Apply SPF 50+ mandatory for 4 weeks
- Moisturising: use gentle moisturising creams
- Topical agents: application of hydroquinone 4%, tranexamic acid or other lightening agents enhances effect
- Interval between procedures: 2-6 weeks (typically 4 weeks)
- Number of procedures: 3-6 sessions for optimal results
PACKAGE CONTENTS
Basic package includes:
- Main unit – with control and cooling system
- Thulium laser 1927 nm – fibre source, 30 W
- Working handpiece – with 30 mm tip
- Touch screen – intuitive control interface
- Scanning system – with programmable patterns (square, triangle, circle, hexagon)
- Patient safety goggles – 1 pair
- Operator safety goggles – 1 pair
- Power cord – AC 220V (or 110V)
- User manual – in Russian and English
- Software – with language adjustment capability
CONTRAINDICATIONS
Absolute contraindications:
- Pregnancy and lactation
- Active herpes or skin infections
- History of keloid scars
- Use of photosensitising drugs (isotretinoin, tetracyclines)
- Recent or active tanning (last 2-4 weeks)
- Skin cancer
Relative contraindications:
- Hormonal disorders (may aggravate melasma)
- Very dark skin (Fitzpatrick VI) – requires cautious use
- Epilepsy (photosensitive)
- Pigmentation disorders (vitiligo)
ADVANTAGES
- Fast treatment (6-8 minutes for full face). The fastest skin resurfacing solution thanks to high power and efficient scanning system.
- Wide coverage. Large beam diameter (200-350 mm) and scanning size (up to 20×20 mm) for increased efficiency.
- Minimal risk of PIH. The 1927 nm wavelength has the lowest risk of post‑inflammatory hyperpigmentation among all pigmentation lasers.
- Short downtime (2-4 hours to 2 days). Unlike CO₂ (7-14 days) and even Er:YAG (3-5 days), 1927 nm provides the shortest downtime.
- Safe for all skin types. Suitable for Fitzpatrick skin types I-VI, including Asian and dark skin.
- All‑season use. Can be used year‑round, including summer (with mandatory SPF).
- Combinability. Excellent combination with other procedures (chemical peels, topical agents, microneedling).
- Intuitive control. Simple interface with adjustable parameters: coverage ratio, total energy, density, interval.
- Customisable software. Language and software settings support to meet various needs.
The 1927 nm wavelength has a high water absorption coefficient (5-7 times higher than 1550 nm), allowing precise targeting of the epidermis and upper dermis, making it particularly effective for treating hyperpigmentation with minimal risk of post-inflammatory hyperpigmentation (PIH).
OPERATING PRINCIPLE OF THE 1927 NM THULIUM LASER
Fractional energy delivery. Unlike traditional lasers that treat the entire skin surface continuously, the thulium laser uses fractional mode – creating thousands of microscopic zones of thermal damage (Microthermal Treatment Zones, MTZ) surrounded by healthy tissue.
What are MTZ (Microthermal Zones)?
- Diameter of each zone: 50-100 microns
- Penetration depth: 50-200 microns (depending on energy)
- Coverage density: 15-70% of skin area per pass
- Number of zones: thousands of micro-zones per procedure
High water absorption – targeted action on the epidermis. The 1927 nm wavelength has a 5-7 times higher water absorption coefficient than 1550 nm, and significantly higher than CO₂ 10600 nm. This means that laser energy is quickly absorbed by water in the epidermis, without penetrating too deep into the dermis.
Chromophores (target structures) for 1927 nm:
- Water (H₂O) – main chromophore, high absorption
- Melanin – secondary chromophore, moderate absorption
- Haemoglobin – tertiary chromophore, low absorption
Controlled thermal effect (sub-ablation). The absorbed light energy is instantly converted into heat, creating controlled thermal damage:
Temperature in MTZ:
- Centre of zone: 60-100°C (tissue coagulation)
- Periphery of zone: 40-50°C (stimulation without damage)
- Surrounding tissue: normal temperature
Sub-ablative effect:
- At low energy (10-20 mJ): Non-ablative, creates coagulation only in the epidermis without breaking the surface.
- At medium energy (20-40 mJ): Sub-ablative, creates micropores on the skin surface and coagulation into the upper dermis.
- At high energy (>40 mJ): Near-ablative, creates microchannels through the epidermis into the dermis.
Melanin Shuttling mechanism. The 1927 nm thulium laser creates a unique effect called melanin shuttling – transporting melanin from deep skin layers to the surface for removal.
How it works:
- Laser energy creates microchannels (MTZ) through the epidermis
- Thermal effect destroys melanocytes and fragments melanin
- Melanin fragments are pushed to the surface through the microchannels
- Within 3-7 days, melanin exfoliates together with dead skin cells
- New skin growing from healthy areas has a lighter and more even tone
Stimulation of collagen production and neocollagenesis. Thermal damage activates the wound healing response, which triggers the production of new collagen and elastin:
Recovery phases:
- 0-24 hours: Inflammation and macrophage activation
- 1-7 days: Re-epithelialization (epidermal restoration)
- 7-30 days: Active collagen production by fibroblasts
- 1-3 months: Collagen remodelling and final result
Result:
- Pore reduction: collagen fibres tighten enlarged pores
- Wrinkle reduction: new collagen fills fine wrinkles
- Skin tightening: contraction of old collagen and formation of new gives a mild lifting effect
Creation of micropores for active substance delivery. A unique feature of the 1927 nm thulium laser is the creation of micropores on the skin surface that act as channels for delivering active substances into deep skin layers.
Drug Delivery Enhancement mechanism:
- The laser creates temporary micropores 50-200 microns deep
- Micropores remain open for 2-24 hours after the procedure
- Active substances (serums, growth factors, tranexamic acid) penetrate deeply through the micropores
- Delivery efficiency increases 100-1000 times
TECHNICAL SPECIFICATIONS
- Wavelength: 1927 nm
- Laser source: Thulium Fiber Crystal (Tm:fiber)
- Laser power: 30 W
- Energy per MTZ: 1-300 mJ (adjustable)
- Pulse duration: 0.1-10 ms (adjustable)
- Tip size: 30 mm
- Scanning size (graphic): 1×1 mm – 20×20 mm (adjustable)
- Scanning shape: Square, Triangle, Circle, Hexagon
- Scanning mode: Sequential, Central or Random
- Spot spacing: 0.1-2 mm (adjustable)
- Coverage density: 15-70% per pass
- Fractional mode: adjustable parameters (energy, pulse duration, pattern, tip type), multidimensional action on superficial and deep layers simultaneously: pigmentation, pores, wrinkles, scars
- Sliding mode: lower energy with higher repetition rate, uniform energy distribution, safe action: rejuvenation, photoaging
- Pulse mode: individual pulses with controlled duration: spot treatment
- Super pulse mode: high peak power with short pulses: deep scars, thick skin
- Cooling system: Air cooling
- Display: Touch screen with intuitive interface
- Input voltage: AC 220V 50/60 Hz (or 110V)
APPLICATION AREA
Melasma:
- Efficiency: 29-36% improvement in MASI (Melasma Area and Severity Index) after 3 procedures
- Mechanism: Melanin shuttling – transport of melanin to the surface and exfoliation
- Protocol: 3-6 procedures every 2-6 weeks + topical hydroquinone 4% after each procedure
- Advantage: Minimal risk of relapse and PIH compared to CO₂ laser
Post-inflammatory hyperpigmentation (PIH):
- Efficiency: Excellent results in 75% of patients after 1-4 procedures
- Special feature: Safe for dark skin (Fitzpatrick IV-VI)
- Protocol: Low energy (20 mJ), low density (30% coverage), 4 passes
Solar lentigo and freckles:
- Efficiency: Very high (>75% lightening after 2-3 procedures)
- Mechanism: Selective destruction of melanin in the epidermis
- Result: Visible lightening within 3-7 days after the procedure
Photoaging and overall skin lightening:
- Efficiency: High, luminosity enhancement
- Mechanism: Removal of photodamaged epidermis and stimulation of renewal
- Result: Brighter, lighter and more even skin
Fine wrinkles and texture:
- Efficiency: High for fine wrinkles, moderate for deep wrinkles
- Mechanism: Neocollagenesis and dermal remodelling
- Protocol: 3-5 procedures every 4-6 weeks
Enlarged pores:
- Efficiency: High, noticeable reduction in pore size
- Mechanism: Collagen contraction around pores + neocollagenesis
- Result: Visible improvement after the first procedure
Elasticity and tone improvement:
- Efficiency: Moderate to high, refreshed appearance
- Mechanism: Stimulation of collagen and elastin production
Acne scars (atrophic):
- Efficiency: 35-36% improvement in GBS (Global Acne Scarring) after 3 procedures
- Comparison: Similar efficacy to ablative Er:YAG 2940 nm but with shorter downtime
- Protocol: 3-5 procedures every 4-6 weeks, medium-high energy (30-50 mJ)
Post‑surgical scars:
- Efficiency: Moderate, better for fresh scars (<1 year)
- Mechanism: Micro‑peeling and collagen remodelling
Hair growth stimulation:
- Efficiency: Moderate, ancillary role
- Mechanism: Direct thermal stimulation + creation of microchannels for delivery of growth factors
- Protocol: 4-6 procedures + topical growth factors
Drug Delivery Enhancement:
- Application: Enhancing penetration of topical agents (serums, growth factors, tranexamic acid)
- Efficiency: 100-1000 times increase in penetration
Procedure protocol
- Skin type assessment: Determine Fitzpatrick type (I-VI)
- Skin preparation: cleanse of cosmetics and impurities, apply topical anaesthetic (optional, not mandatory)
- Parameter adjustment: for pigmentation: 20-30 mJ, 30-50% coverage, 4-6 passes; for rejuvenation: 15-25 mJ, 15-30% coverage, 6-8 passes; for scars: 30-50 mJ, 40-60% coverage, 4-6 passes
- Select scanning shape: Square for large areas, Circle for face
- Select mode: Sequential for uniform coverage, Random to minimise heat accumulation
- Procedure performance:
- Test pulse: apply to a small area to assess reaction
- Area treatment: even scanning with adjusted parameters
- Multiple passes: 4-8 passes depending on goal (each pass increases coverage density)
- Procedure time: full face in 6-8 minutes
- Immediate effect: mild redness and swelling (resolve within 2-24 hours)
- Post‑procedure care:
- 0-2 hours after: mild redness (like after sun exposure), makeup allowed
- 2-24 hours: redness decreases, mild peeling may appear
- 3-7 days: micro‑crusts (MEST – Microscopic Epidermal Necrotic Debris) exfoliate, skin becomes lighter
- Apply SPF 50+ mandatory for 4 weeks
- Moisturising: use gentle moisturising creams
- Topical agents: application of hydroquinone 4%, tranexamic acid or other lightening agents enhances effect
- Interval between procedures: 2-6 weeks (typically 4 weeks)
- Number of procedures: 3-6 sessions for optimal results
PACKAGE CONTENTS
Basic package includes:
- Main unit – with control and cooling system
- Thulium laser 1927 nm – fibre source, 30 W
- Working handpiece – with 30 mm tip
- Touch screen – intuitive control interface
- Scanning system – with programmable patterns (square, triangle, circle, hexagon)
- Patient safety goggles – 1 pair
- Operator safety goggles – 1 pair
- Power cord – AC 220V (or 110V)
- User manual – in Russian and English
- Software – with language adjustment capability
CONTRAINDICATIONS
Absolute contraindications:
- Pregnancy and lactation
- Active herpes or skin infections
- History of keloid scars
- Use of photosensitising drugs (isotretinoin, tetracyclines)
- Recent or active tanning (last 2-4 weeks)
- Skin cancer
Relative contraindications:
- Hormonal disorders (may aggravate melasma)
- Very dark skin (Fitzpatrick VI) – requires cautious use
- Epilepsy (photosensitive)
- Pigmentation disorders (vitiligo)
ADVANTAGES
- Fast treatment (6-8 minutes for full face). The fastest skin resurfacing solution thanks to high power and efficient scanning system.
- Wide coverage. Large beam diameter (200-350 mm) and scanning size (up to 20×20 mm) for increased efficiency.
- Minimal risk of PIH. The 1927 nm wavelength has the lowest risk of post‑inflammatory hyperpigmentation among all pigmentation lasers.
- Short downtime (2-4 hours to 2 days). Unlike CO₂ (7-14 days) and even Er:YAG (3-5 days), 1927 nm provides the shortest downtime.
- Safe for all skin types. Suitable for Fitzpatrick skin types I-VI, including Asian and dark skin.
- All‑season use. Can be used year‑round, including summer (with mandatory SPF).
- Combinability. Excellent combination with other procedures (chemical peels, topical agents, microneedling).
- Intuitive control. Simple interface with adjustable parameters: coverage ratio, total energy, density, interval.
- Customisable software. Language and software settings support to meet various needs.
KEY BENEFITS
Free training
Official warranty
Free shipping
English language menu
Certificates of conformity
Full documentation package
Frequently Asked Questions
Yes! COSMO TECH offers free shipping to all seven emirates of the UAE (Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain) as well as to all GCC countries - Saudi Arabia, Qatar, Kuwait, Bahrain, and Oman. Delivery typically takes 3-7 business days depending on the location. Customs clearance documentation is included in our service.
We provide clients with a full package of legal documents required for equipment registration with UAE health authorities, including the sales contract, certificate of conformity, EAC certificate, declaration of conformity (EAC), test certificate, and acceptance certificate. Our team can also advise you on the registration process with the Ministry of Health & Prevention (MOHAP), Dubai Health Authority (DHA), or Abu Dhabi Department of Health (DOH).
Absolutely! Every COSMO TECH customer receives free online training tailored to the specific device you purchased. Our training is conducted by certified specialists with years of practical experience in aesthetic medicine. If you need hands-on practice, we also offer paid offline training at our training centers or directly at your salon. Upon completion, you receive a personalized certificate confirming your qualification to operate the equipment.
Yes, we do. COSMO TECH provides interest-free installment plans for our clients in the UAE and Gulf region. The specific terms depend on the order value and your business status. We understand that investing in professional equipment requires budget planning, so our team will work with you to find a payment solution that fits your needs. Contact our sales department for a customized offer.
All COSMO TECH equipment comes with an official 24-month warranty. If a technical issue arises, our certified technicians and partners in the UAE can respond quickly. In case of malfunction, the repair is carried out at our authorized service center or by our on-site technicians. The warranty covers manufacturing defects; it does not cover mechanical damage or unauthorized repairs.
Currently, COSMO TECH operates primarily through our online platform and official website cosmo-tech, with dedicated account managers for the Gulf region. While we do not yet have a physical showroom in Dubai, we offer detailed video demonstrations, remote consultations, and can connect you with existing clients in the UAE for a live demonstration upon request. We also provide a full documentation package and certificates so you can verify compliance with local regulations.
Yes, most of our devices come with a menu in English as standard, with another laguages also available. For selected models, we can provide an Arabic interface or help you adapt the menu for your local staff. Our team also provides instructions and guidance in English, so you can be confident that your technicians will operate the equipment correctly regardless of their native language.
If the product has not yet been transferred to you, you may cancel your order. After receiving the equipment, you have 7 days to inspect it - provided the device has not been used, the seals and labels are intact, and the original packaging and documents are preserved. If a manufacturing defect is identified within 14 days of purchase, we will arrange an exchange or full refund. Consumables and custom-configured devices may not be eligible for return. We ship orders across the GCC free of charge, and return shipping costs are handled according to the specific case.
Company reviews
Contact & Support
We’re with you at every step, helping you choose the right equipment for your tasks.
Working hours: Daily, 9:00 AM to 8:00 PM
tel:+971547678060
🚩 DUBAI / UAE
By submitting this form, you confirm that you have read and agree to our Privacy Policy and hereby give your consent to the processing of your personal data.
Contact & Support
We’re with you at every step, helping you choose the right equipment for your tasks.
Working hours: Daily, 9:00 AM to 8:00 PM
🚩 DUBAI / UAE
By submitting this form, you confirm that you have read and agree to our Privacy Policy and hereby give your consent to the processing of your personal data.
Manage cookies
Cookie Settings
Cookies necessary for the correct operation of the site are always enabled.
Other cookies are configurable.
Other cookies are configurable.
Our managers will contact you within 15 minutes and provide a consultation on all questions.
By submitting this form, you confirm that you have read and agree to our Privacy Policy and hereby give your consent to the processing of your personal data.